Our billet aluminum solid shifter bushings, these bushings provide an increased feel in shifting performance.  Replace your worn out rubber bushings on your shift linkage to shifter to increase the feeling in the shifter.  These come with a pair of solid bushings, o-rings and the correct prevailing torque nut.  This will fit both F and H series shifter cables.

*Be sure to check your shifter to ensure our solid bushings fit over the mounting stud.  The mounting hole in the bushing is an M6. 

 

Our billet aluminum block off plate is designed to fill the hole left in your firewall on the passenger side of the van.  Our FFC logo is etched into the front plate.  Each piece comes with a front and back plate and all hardware in included.

Our billet aluminum block off plate is designed to fill the hole left in your firewall after you remove your A/C lines.  Our FFC logo is etched into the front plate.  Each piece comes with a front and back plate and all hardware is included.

Our extended top hats are made from a solid piece of 6061 billet aluminum.  Our top hats will provide you with an additional 1.25 inches of shock travel that is normally lost when lowering your car.  The top hats will come with all new mounting hardware (pre installed), spring isolator bushings and strut rod bushings.  You will reuse your bumpstop and bushing sleeve.

They are designed to work with all shocks and sleeved coilovers.  They will also work most coilovers that use a 2.5 inch diameter spring that did not come with a replacement top hat.  If you have any questions if they will fit your coilover, please contact FFC before you order. Be sure to also check your strut bar mounting brackets.  Some strut bar brackets may not provide enough clearance for the added height of our top hats.

INSTALLATION INSTRUCTIONS

Product description: Our unique brake caliper bracket design is milled from a solid piece of 6061 billet aluminum.  Our solid billet aluminum brake caliper brackets allow you to use the 2005+ RL brake calipers on your Accord.  We designed our brackets so that all the mounting holes are centered on the block of aluminum.  By doing this, it ensures that equal stress is being put on both sides.  We also made sure that the caliper is centered around the rotor, which allows the caliper to create equal pressure on each side when the brakes are applied.  All mounting hardware is included with your bracket purchase.  The mounting holes where the bracket is mounted to the knuckle are 5 ½ inches apart.

On our test vehicles we used 2006 350Z rotors* equipped with Brembo calipers.  PLEASE BE SURE THIS WILL CLEAR YOUR WHEEL SET UP BEFORE PLACING YOUR ORDER, YOU MUST HAVE A 17 INCH OR LARGER WHEEL.

INSTALLATION INSTRUCTIONS

*buyer to supply their own brake calipers, brake rotors and brake pads

Product description: Looking for a great way to dress up your radiator?  Look no further than our billet aluminum radiator brackets.  Our radiator brackets are milled from a solid piece of 6061 billet aluminum.  They feature slotted mounting holes for ease of installation.  They also come with stainless steel button head hardware.  Each bracket features our FFC logo.  

This package includes the following FFC products:

• (1) pair of billet aluminum radiator brackets
• (1) billet aluminum battery tie
• (1) set of our billet aluminum fender washers (20 pieces)

 All necessary mounting hardware is included.  You will reuse your factory battery tie down "j" hooks.



Product description: Looking for a part that will show that you have paid attention to the details in your build?  Look no further than our billet aluminum fender washers.  Our fender washers can be used anywhere there is a 10mm bolt that you want to dress up.  These are milled from 7075 aluminum and add a touch of class wherever they are installed.  These come with all the necessary hardware.   

Product description: Looking for a part that will show that you have paid attention to the details in your build?  Look no further than our billet aluminum fender washers.  Our fender washers can be used anywhere there is a 10mm bolt that you want to dress up.  These are milled from 7075 aluminum and add a touch of class wherever they are installed.  These come with all the necessary hardware.